Based on what you've described, it seems like you have already checked the fuses under the fuse/relay box and didn't find any that would work for your project. In that case, you may want to consider tapping into a different power source, such as a wire that connects to the battery or to the ignition switch.
Need help locating the power source
I am adding the hood led light that I want it to be ON once the engine starts (READY mode). Under the fuse/relay box, I looked at the diagram hoping to find the ACC fuse (or anything that get the power when I press the start button) to tap in or piggybag.
I don't see any so I turn on the car and use the 12V tester probing the tester tip to ALL the fuse to no avail!! Yes while I was testing the DRL lights were ON because I turned it ON earlier.
I don't want to look for the DRL wire and I assumed that under the fuse box somewhere, there should be a spot where the power is ON once the system is in READY mode.
Thanks
I don't see any so I turn on the car and use the 12V tester probing the tester tip to ALL the fuse to no avail!! Yes while I was testing the DRL lights were ON because I turned it ON earlier.
I don't want to look for the DRL wire and I assumed that under the fuse box somewhere, there should be a spot where the power is ON once the system is in READY mode.
Thanks
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Toyota BZ Forum
BZForums.com is a forum community dedicated to Toyota BZ owners and enthusiasts. Come join the discussion about the 2023+ Toyota BZ all-electric SUV!
Full Forum Listing
Recommended Communities
